The general objective of 26 GHz. Pulse Radar Level Transmitter provides continuous level measurement up to 32.8 ‘(10m) with a 4-20mA signal output, and is configured via its built-in push button display module. The non-contact liquid level sensor is for the above chemical or metal grade water storage applications or reinforced concrete tanks or underneath the quality tanks of all materials. Select this sensor for easy application conditions with corrosive media, slight agitation, condensation or steam, and installation in a low profile adapter tank or mounting flange.
Characteristics
PTFE encapsulated antenna and mounting for corrosive media
Simple Button Configuration Button Display Module
26 GHz. Pulse radar is affected by steam or condensation
12 “(30cm) dead band allows the use of the entire tank
LCD displays level in feet or meters with percent bar span
Optional display mode indicates the return curve of the echo signal
Automatic temperature compensation for precise measurement
Fail-safe diagnostic outputs with selectable fail-safe signal
Recognition, storage and rejection of the false echo signal
Robust IP67 aluminum housing with polycarbonate window
Characteristics
| Range: | 12 “to 32.8” (30cm to 10m) |
| Frequency: | 26 GHz. |
| Accuracy: | 5mm ± |
| Dead band: | 12 “(30cm) |
| Beam angle: | 19 ° |
| Configuration: | Pushbutton |
| Memory: | Non-volatile |
| Display Type: | LCD, dot matrix |
| Display units: | The feet and the meters |
| Display bar: | Percent of scale |
| View chart: | Signal curve Echo |
| Supply voltage: | 16-26 VDC |
| Max. consumption: | 22.5 mA |
| Signal output: | 4-20 mA, two-wire |
| Inverted signal: | 4-20 mA, 20-4 mA |
| Signal fail-safe: | 3.9 mA, 20.5 mA, 22 mA |
| Temp Process: | F: -40 ° to 266 ° C: -40 ° to 130 ° |
| Temp. Comp.: | Automatic |
| Storage temperature: | F: -40 ° to 176 ° C: -40 ° to 80 ° |
| Pressure: | -14.5 to 43.5 psi (-1 to 3 bar) |
| Protection sign: | IP67 |
| Pj. Equipment: | Aluminum w / silicone seal, neck PBT FR & Wrench |
| Pj. Window mats.: | Polycarbonate |
| Input Conduit: | (1) 1/2 “NPT connector (1) M20 x 1,5 cap |
| Antenna equipment: | PTFE |
| Assembly process: | 1 1/2 “NPT |
| Classification: | Main objective |
| Certification: | cTUVus FCC |
| Conformity: | CE, RoHS |
– See more at: http://www.flowline.com/echopulse_lr10.php#sthash.njNFUqWU.dpuf
